H!Fiber Mini PCIe 2.5G Ethernet Network Card, Realtek RTL8125 Controller, 10/100/1000/2500 Mbps Single RJ45 Port, 2.5 Gigabit NIC with 0.3m(0.98ft) Cable, Mini Pice Interface, not for M.2

Original price was: $29.99.Current price is: $18.99.

Category:








Customers say

Customers find the network interface card works well and is easy to install. They appreciate its port capacity, with one customer noting it's a solid 2.5G 4-port NIC. They like its speed, with one mentioning it gets 2400 Mbps when their internet is only 2gb.

8 customers mention "Functionality"7 positive1 negative

Customers report that the network interface card works well, with one customer noting sustained transfers without degradation.

"Works great, no issues. Fast and reliable so far." Read more
"Works well and gets 2400 when our internet is 2gb only. This is a great card!!! Windows picked up instantly installed drivers" Read more
"…Haven’t had any issues with connections as it is my home router and physical firewall. Overall would definitely get again." Read more
"…driver loaded without any special modifications. I see no errors from the card…." Read more
6 customers mention "Port capacity"5 positive1 negative

Customers appreciate the network interface card's port capacity, with one mentioning it is a solid 2.5G 4-port NIC.

"Great nic, just wish it worked out of the box with opnsense. Returned 2 but may buy some more later for my next project." Read more
"Works well and gets 2400 when our internet is 2gb only. This is a great card!!! Windows picked up instantly installed drivers" Read more
"Perfect!" Read more
"Great multi-port 2.5 GbE product!…" Read more
5 customers mention "Ease of installation"4 positive1 negative

Customers find the network interface card easy to install, with one customer noting that the driver loaded without special modifications and another mentioning it's simple to change the metal flange.

"…Was easy to change the metal flange to the shorter height one. Was, of course, easy to install in the system…." Read more
"…driver loaded without any special modifications. I see no errors from the card…." Read more
"…I got this and installed it seamlessly and my problem was immediately resolved." Read more
"Drivers were a little difficult to install for PFSense but eventually with enough research, you’ll be able to get it up and running…." Read more
3 customers mention "Speed"3 positive0 negative

Customers appreciate the network card's speed, with one mentioning its x4 performance and another noting it saturates the bus, while another reports achieving 2400 Mbps even with a 2gb internet connection.

"Works great, no issues. Fast and reliable so far." Read more
"…the x1 speed limit, having x4 means more slots and more bandwidth to saturate the bus…." Read more
"Works well and gets 2400 when our internet is 2gb only. This is a great card!!! Windows picked up instantly installed drivers" Read more








Top reviews from the United States



  • Reviewed in the United States on August 17, 2025

    Size: 2.5G RTL8125Color: 4 RJ45Verified Purchase

    Works great, like the LPB bracket inclusion if necessary. Note if using in Windows – I added this to a T420 server that only had integrated GbE, so I was looking to bump up to 2.5GbE. Windows downloaded a RealTek driver, and I was off and running. But… copies to the server were okay – 2.5GbE with occasional hangs, but only 1GbE from the unit. I figured it was PCIe bus related, so I tried all sorts of things. BUT… I finally went to RealTek, downloaded the latest Windows 10/11 drivers, and let it install… and now, I transfer 2.5GbE both ways. I like that this card is PCIe x4 as x1 is right up against the x1 speed limit, having x4 means more slots and more bandwidth to saturate the bus. Also note the cards will only link gigabit to my switch before Windows comes up, so check your link speed on your switch after boot, not on power-off link. Great deal for 4 2.5Gb ports.


  • Reviewed in the United States on September 21, 2025

    Size: 2.5G RTL8125Color: 1 RJ45Verified Purchase

    Using Proxmox, which rides on Debian 12(?) Linux. This works right out of the box with NO ISSUES at all. Full speed, I have 2 of them that form my storage network, while a normal gig card talks to my main network. Would buy again and every time from this point on. Might sell and bench this one and go for the 10g model they have.


  • Reviewed in the United States on August 24, 2025

    Size: 2.5G RTL8125Color: 4 RJ45Verified Purchase

    Works great, no issues. Fast and reliable so far.


  • Reviewed in the United States on March 5, 2025

    Size: 2.5G RTL8125Color: 4 RJ45Verified Purchase

    Great nic, just wish it worked out of the box with opnsense. Returned 2 but may buy some more later for my next project.

    One person found this helpful


    Report


  • Reviewed in the United States on April 19, 2025

    Size: 2.5G RTL8125Color: 4 RJ45Verified Purchase

    After using this NIC for a month or so, I am overall very impressed with the device. Was easy to change the metal flange to the shorter height one. Was, of course, easy to install in the system. System runs Linux, so it immediately identified the NIC and I was able to utilize it. Performed a speed test with the 2.5G switch I have and a system with a 2.5G NIC in it with this 4-port. Received 2.45 Gbps through put (tested using IPerf3 and a Cat6 shielded cable). Would buy it again (and probably will for a next project coming up)

    One person found this helpful


    Report


  • Reviewed in the United States on June 9, 2025

    Size: 2.5G(M.2 A+E Key)Color: 1 RJ45Verified Purchase

    Works great. Beware that some tools in Linux max at at gigabit and won’t report that it’s running at full speed. Had to do some googling to figure it out.


  • Reviewed in the United States on March 1, 2025

    Size: 2.5G RTL8125Color: 1 RJ45Verified Purchase

    Works well and gets 2400 when our internet is 2gb only. This is a great card!!!
    Windows picked up instantly installed drivers


  • Reviewed in the United States on December 12, 2024

    Size: 2.5G RTL8125Color: 2 RJ45Verified Purchase

    Drivers were a little difficult to install for PFSense but eventually with enough research, you’ll be able to get it up and running. Haven’t had any issues with connections as it is my home router and physical firewall. Overall would definitely get again.

    5 people found this helpful


    Report






Product Summary: H!Fiber Mini PCIe 2.5G Ethernet Network Card, Realtek RTL8125 Controller, 10/100/1000/2500 Mbps Single RJ45 Port, 2.5 Gigabit NIC with 0.3m(0.98ft) Cable, Mini Pice Interface, not for M.2

From H!Fiber.com
Mini PCIe NIC: Single RJ45 Port support 10/100/1000/2500 Mbps and connect Cat5e, up to 100 meters. Mini PCIe Card with 0.3m(0.98ft) cable length. Mini PICe Interface, not for M.2
NIC Controller: Base on original Realtek RTL8125BG Controller, which improve servers stability
Support Windows 7/8/10/11, Windows Server 2008 R2/2012 R2/2016/2019/2022, RHEL/CentOS 7/8, Debian 9/10/11, Ubuntu 18/20/21, SUES 11/12/15, Vmware ESXi 6, NOT SUPPORT ESXI 7/8 and FREEBSD, NOT SUPPORT HOT SWAPING.
High Performance: Support PXE, DPDK, WOL, iSCS, Jumbo Frames, Not-Support FCoE
Easy to Install: Packed with BOTH Low Profile Bracket and Full-height Bracket that support on Standard and Slim computer/server

Customers say

Customers find the network interface card works well and is easy to install. They appreciate its port capacity, with one customer noting it’s a solid 2.5G 4-port NIC. They like its speed, with one mentioning it gets 2400 Mbps when their internet is only 2gb.

[ad_2]

Reviews

There are no reviews yet.

Be the first to review “H!Fiber Mini PCIe 2.5G Ethernet Network Card, Realtek RTL8125 Controller, 10/100/1000/2500 Mbps Single RJ45 Port, 2.5 Gigabit NIC with 0.3m(0.98ft) Cable, Mini Pice Interface, not for M.2”

Your email address will not be published. Required fields are marked *